Tá anmeaisín pléasctha lámhaigh de chineál hookgo ginearálta bíonn cuma níos mó air, agus tá an próiseas suiteála réasúnta níos casta ná próiseas trealaimh bhig. Is iad suiteáil cheart agus meaisín tástála an eochair chun gnáthoibriú an trealaimh níos déanaí a chinntiú. I gcás oibríochtaí tosaigh neamhoilte, éilítear ar úsáideoirí treoracha an phearsanra ábhartha a leanúint go docht nó tagairt a dhéanamh do na treoracha. Is féidir le hoibriú neamhúdaraithe damáiste dochúlaithe a dhéanamh donmeaisín pléasctha lámhaigh hook. Tá anshot blasting machine manufacturer has sorted out the precautions for installation and test machine to share with you. I hope it will be helpful to users who use the device for the first time.
1. Installation. Tá anmeaisín pléasctha lámhaigh de chineál hook is installed and debugged in the production plant and disassembled into several parts before being transported to the user site for installation. Although there is no pit, the foundation must be firm, the anchor bolt holes must be standardized, and the chamber body must be adjusted. After the second irrigation, the anchor bolt nuts can be tightened after solidification. After the chamber body is fixed, the various parts can be installed. Tá anprecautions for the installation and debugging of the relevant components are introduced below.
1. Gléas pléasctha lámhaigh:
Tá anshot blasting device has been installed on the chamber body before leaving the factory. Please pay attention to the problems to be debugged before use. Check whether the fixed positions of the blade, the pill wheel, the directional sleeve, and the guard plate are accurate and firm, and check whether the direction of rotation is correct after power on. Then adjust the position of the directional sleeve opening. Theoretically, the angle between the front edge of the directional opening and the front edge of the blade throwing position is about 900. After fixing the position of the directional sleeve, the position of the projectile belt can be detected by hanging Place a steel plate or wooden board on the position of the workpiece facing the exit of the shot blasting machine, start the shot blasting machine, put a small amount (2-5kg) of projectiles into the blasting tube, and then stop, check whether the hit position on the steel plate is suitable for the needs, such as Close the window of the bias-adjustable directional sleeve downwards, and vice versa, until it fits, and note the position of the directional sleeve opening as a basis for future replacement of the directional sleeve.
2. Ardaitheoir ardaitheoir agus scriú:
Déan tástáil gan ualach ar dtús chun a sheiceáil an bhfuil an buicéad ardaithe agus na lanna bíseach ag rith sa treo ceart, ansin déan crios an ardaitheora a theannadh go measartha teannas chun diall a sheachaint, agus ansin tástáil ualaigh a dhéanamh chun seiceáil an cumas oibríochta agus iompair, cibé an bhfuil Torann agus tonnchrith aisteach ann, constaicí a sheiceáil agus a bhaint.
3. Deighilteoir pill-ghaineamh:
Seiceáil ar dtús an bhfuil gluaiseacht an reithe solúbtha, agus ansin seiceáil áit cheart an phláta deighilte, ansin nuair a bhíonn an t-ardaitheoir luchtaithe agus dífhabhtaithe, tá insreabhadh leanúnach de shots cruach ann, agus seiceáil an bhfuil na seatanna cruach ag sileadh amach agus ag titim. nuair a scaoiltear an fánán